Circutor Computer SMART III FAST 12, Инструкция по эксплуатации

Страница: 52 / 112

AutoTest Parameters
AutoTest home screen.
To start the AutoTest:
Press the key,
OFF
blinks.
Press the key to switch from
OFF
to
START
Press the key to start the AutoTest
Once the AutoTest has started, the results of the
capacitors that are connected and disconnected
are shown:
Leakage current (mA)
Capacitive Reactive Power
(kvarC or MvarC)
Capacitive Power % of each capacitor relative
to the total estimated value�
The icon blinks during the AutoTest.
A long press (> 3 s) of the key cancels the AutoTest.
At the end of the AutoTest, the unit automatically returns to the Individual Test screen.
Individual Test Parameters
Leakage current
(mA)
Capacitive Reactive Power
(kvarC or MvarC)
Capacitive Power % of each capacitor relative
to the total estimated value�
Switches between the various
capacitors.
A long press (> 3 s) of the key connects the capacitor that is being displayed, taking into account
the programmed connection and reconnection times.
A long press (> 3 s) of the
key disconnects the capacitor that is being displayed, taking into ac-
count the programmed connection and reconnection times.
52
Computer SMART III FAST
Instruction Manual