Circutor Computer SMART III FAST 12, Инструкция по эксплуатации

Страница: 81 / 112

in which case the C/K value of the previous example would be
0.72
.
If the C/K is configured lower than the actual value, connections and disconnections
would occur continuously with few load variations (the system performs more opera-
tions than necessary).
If the C/K is configured higher, the regulator requires a higher demand for reactive
power in order to switch and perform fewer operations.
Press the key to enter editing mode. It is identified by the symbol and the blinking of the
digits to be modified.
The key increases the digit value.
The key decreases the digit value.
The key skips to the previous digit and the key skips to the next digit.
Press to validate the data; the symbol disappears from the display.
Minimum value: 0.02
Maximum value:
1.0
If the value entered is lower than the minimum value or higher than the maximum value, the backlight
of the display flashes and the value entered is replaced with the minimum or maximum value, or with
the last value validated.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
“5.30.- SIMULATION
SCREEN”
.
81
Instruction Manual
Computer SMART III FAST