54
CP55 Mobile Computer
Reference Manual
2D IMAGER SETTINGS
Setting
Description
Default
Decode Timeout
Sets the maximum time for the decoding process during a
scan. Configurable between 1 sec to 9 sec.
3 sec.
Redundancy Level
Sets how many successful readings should be done before
linear barcodes such as Codabar, MSI, and Interleaved 2 of
5 can be decoded. Levels 1 to 4 available.
Level 1
Security Level
Sets the security level to ensure decoding accuracy
considering the printed quality of barcodes such as Code
128, Code 93, and UPC/EAN. The higher the level is, the
more security is ensured. Options are:
Level Description
0
With this default, the scan engine is aggressive
enough to decode most “in-spec” barcodes.
1
Select this level if misdecodes have occurred. It
fixes most misdecodes.
2
Select this level if Level 1 should fail to
eliminate misdecodes.
3
Select this level if Security Level 2 should fail to
prevent misdecodes. However, as this level
actually impairs the decoding ability of the
decoder, a safer solution would be to improve
the quality of the bar codes to read.
Level 0
Inter-Char Gap Size
Sets the intercharacter gap size for Code 39 and Codabar.
Switch between
Normal
and
Large
.
Normal
Scan Mode
Sets the reader’s scanning behavior. Options available are
Level
,
Presentation Mode
and
Auto Aim
.
Level: Decoding process is activated by trigger event
and continues until trigger event ends, a valid decode
happens or decode session time-out is reached.
Presentation Mode: The imager engine attempts to
decode when an object appears in its field of view.
Sleeping state is not entered when this mode is
activated.
Auto Aim: Red aiming pattern is turned on when the
imager engine detects motion. A trigger event will then
activate decoding. If 2 seconds go by without any
activity, the aiming pattern goes off.
Level
Decoding Illumination Enables an LED light beam to aid barcode reading.
Selected
(Enabled)
Decode Aiming
Pattern
Projects a crosshair at the center of the laser light beam to
facilitate barcode reading.
Selected
(Enabled)
Picklist Mode
When selected, only barcodes aligned at the crosshair of
the laser light beam will be decoded.
Deselected
(Disabled)
Display Mode
Enable improved performance for reading barcodes on
electronic displays and mobile phones.
Deselected
(Disabled)
Содержание CP55
