3. PORTASPEC INITIAL SETUP
3-2
3.3.
Model 2501XBT Portaspec Assembly
1.
Connect the water circulator hoses and fill the circulator. Refer to Section 7-1
for detailed instructions on the Model 2522X Coolant Circulator.
2.
Plug the water circulator into the top receptacle in the back of the Portaspec.
3.
With the power switch in the Off position, plug the Portaspec power cord into
the Portaspec and its dedicated power source or the constant output power
supply, if supplied.
Do not turn on power yet!
Now make the computer connections. The touch-screen computer should be placed
on top of the Portaspec, next to the Sample Holder. Refer to the image below,
keeping in mind that the image of the computer and your actual computer may differ.
1.
First, connect the computer power cord to the computer and turn the
computer on.
2.
Wait for Windows
®
to completely boot up and insert the USB cable into the
USB port.
3.
For added security, connect the keyed computer security lock if provided.
4.
Now press the Power On rocker switch. You should hear a single beep and
a flicker from the x-ray on light, indicating a proper power up.
5.
Run the Portaspec Analysis and Control software. In an effort to avoid
redundant instructions, refer to the “Setup Guide” and the “Portaspec X
Series Software Instruction” manual for detailed instructions on the software.
Touch-Screen Computer Setup
Image 3-1
Security Lock
(certain Computer Models only)
USB Connector
Power Connector
Содержание 2501XBT
Страница 38: ...9 X SERIES TECHNICAL DATA 9 1 ...
Страница 40: ...APPENDIX ...