Chrysler Automobile Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 434

Chrysler Automobile Скачать руководство пользователя страница 51

Children that are not big enough to wear the vehicle seat
belt properly (see Section on Child Restraints) should be
secured in the rear seat in child restraints or belt-
positioning booster seats. Older children who do not use
child restraints or belt-positioning booster seats should
ride properly buckled up in the rear seat. Never allow
children to slide the shoulder belt behind them or under
their arm.

If a child from 1 to 12 years old (not in a rear facing child
seat) must ride in the front passenger seat, move the seat
as far back as possible and use the proper child restraint.
(Refer to information on Child Restraints in this section.)

You should read the instructions provided with your
child restraint to make sure that you are using it properly.

All occupants should ALWAYS wear their lap and shoul-
der belts properly.

The driver and front passenger seats should be moved
back as far as practical to allow the Advanced Front
Airbags room to inflate.

Do not lean against the door. If your vehicle has side
airbags, and deployment occurs, the side airbags will
inflate forcefully into the space between you and the
door.

If the airbag system in this vehicle needs to be modified
to accommodate a disabled person, contact the Customer
Center. Phone numbers are provided under

⬙

If You Need

Assistance

⬙

in Section 9 of this manual.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

51

«
...
49
50
51
52
53
...
»

Содержание Automobile



















































































































































































































































































































































































































































Отзывы:

Нет отзывов