Chrysler Automobile Скачать руководство пользователя страница 253

Страница: 253 / 434

1. Turn the ignition switch to the ACC or ON position
(RUN position with Keyless Go™) without starting the
engine.

2. Firmly set the parking brake.

3. Press and maintain firm pressure on the brake pedal.

4. Using the screwdriver, press and hold the override tab
through the access port on the center console.

5. Move the shift lever into the NEUTRAL position.

6. The vehicle may then be started in NEUTRAL.

7. Reinstall the override cover.

Interlock Manual Override

STARTING AND OPERATING

253

Содержание Automobile



















































































































































































































































































































































































































































Результаты поиска

Содержание Automobile

Отзывы:

Chrysler Automobile, Руководство пользователя, Страница: 253 / 434

Результаты поиска

Содержание Automobile

Отзывы: