Chrysler Automobile Скачать руководство пользователя страница 256 | Manualshive

Страница: 256 / 434

Chrysler Automobile Скачать руководство пользователя страница 256

NEUTRAL

This range is used when the vehicle is standing for
prolonged periods with the engine running. The engine
may be started in this range. Set the parking brake if you
must leave the vehicle.

CAUTION!

Coasting the vehicle or driving for any other reason
with the shift lever in NEUTRAL can result in
transmission damage.

WARNING!

Do not coast in NEUTRAL and never turn off the
ignition to coast down a hill. These are unsafe
practices that limit your response to changing traffic
or road conditions. You might lose control of the
vehicle and have an accident.

DRIVE

This range should be used for most city and highway
driving. It provides the smoothest upshifts and down-
shifts and the best fuel economy.

The transmission automatically upshifts through fifth
gear. The DRIVE position provides optimum driving
characteristics under all normal operating conditions.

When frequent transmission shifting occurs when using
the Overdrive range, such as when operating the vehicle
under heavy loading conditions (in hilly terrain, traveling
into strong head winds, or while towing heavy trailers, use
the AutoStick

威

mode and select the “3” range.

Delayed Shifts in Cold Temperatures

During cold temperature operation, you may notice
delayed upshifts depending on engine and transmission
temperature as well as vehicle speed. This feature im-
proves warm up time of the engine and transmission to
achieve maximum efficiency.

256

STARTING AND OPERATING

«
...
254
255
256
257
258
...
»

Содержание Automobile



















































































































































































































































































































































































































































Отзывы:

Нет отзывов