Chrysler Automobile Скачать руководство пользователя страница 32

Страница: 32 / 434

4. Within 30 seconds, depress the power door UNLOCK
switch to unlock the doors.

5. A single chime will indicate the completion of the
programming.

NOTE:

If you do not hear the chime, it means that the

system did not enter the programming mode and you
will need to repeat the procedure.

6. Repeat these steps if you want to return this feature to
its previous setting.

NOTE:

Use the Automatic Unlock Doors On Exit feature

in accordance with local laws.

WINDOWS

Power Windows

The window controls on the driver’s door control both of
the door windows.

Power Window Switches

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание Automobile



















































































































































































































































































































































































































































Результаты поиска

Содержание Automobile

Отзывы:

Chrysler Automobile, Руководство пользователя, Страница: 32 / 434

Результаты поиска

Содержание Automobile

Отзывы: