Chrysler Automobile Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 434

Chrysler Automobile Скачать руководство пользователя страница 16

The system uses Key Fob with factory-mated Remote
Keyless Entry (RKE) transmitter and Wireless Ignition
Node (WIN) to prevent unauthorized vehicle operation.
Therefore, only Key Fobs that are programmed to the
vehicle can be used to start and operate the vehicle. The
system will not allow the engine to crank if an invalid
Key Fob is used to start and operate the vehicle.

After placing the ignition switch in the RUN position, the
Vehicle Security Light will turn on for three seconds for a
bulb check. If the light remains on after the bulb check, it
indicates that there is a problem with the electronics. This
condition will result in the engine being shut off after two
seconds.

If the Vehicle Security Light turns on during normal
vehicle operation (vehicle running for longer than 10 sec-
onds), it indicates that there is a fault in the electronics.
Should this occur, have the vehicle serviced as soon as
possible by an authorized dealer.

NOTE:

The Sentry Key

威

Immobilizer System is not

compatible with aftermarket remote starting systems.
Use of these systems may result in vehicle starting
problems and loss of security protection.

All of the Key Fobs provided with your new vehicle have
been programmed to the vehicle electronics.

Replacement Keys

NOTE:

Only Key Fobs that are programmed to the

vehicle electronics can be used to start and operate the
vehicle. Once a Key Fob is programmed to a vehicle, it
cannot be programmed to any other vehicle.

16

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
14
15
16
17
18
...
»

Содержание Automobile



















































































































































































































































































































































































































































Отзывы:

Нет отзывов