Chrysler Automobile Скачать руководство пользователя страница 136 | Manualshive

Страница: 136 / 434

Chrysler Automobile Скачать руководство пользователя страница 136

previous set speed. To do so, push the lever upward to
RESUME ACCEL and release. Then remove your foot
from the accelerator pedal.

To Vary the Speed Setting

When the Electronic Speed Control is set, you can in-
crease speed by pushing up and holding the Electronic
Speed Control lever in RESUME ACCEL. If the lever is
held in the RESUME ACCEL position, the set speed will
continue to increase in 5 mph (10 km/h) increments until
the lever is released. When the Electronic Speed Control
lever is released, a new set speed will be established.

Tapping the Electronic Speed Control lever to RESUME
ACCEL once will result in a 1 mph (1.6 km/h) speed
increase. Each time the Electronic Speed Control lever is
tapped speed increases, so tapping the Electronic Speed
Control lever three times will increase speed by 3 mph
(4.8 km/h), etc.

To decrease speed while Electronic Speed Control is set,
push down and hold the Electronic Speed Control lever
in SET DECEL. If the lever is continually held in the SET
DECEL position, the set speed will continue to decrease
in 5 mph (10 km/h) increments until the lever is released.
Release the Electronic Speed Control lever when the
desired speed is reached, and a new set speed will be
established.

Tapping the Electronic Speed Control lever to SET DE-
CEL once will result in a 1 mph (1.6 km/h) speed
decrease. Each time the Electronic Speed Control lever is
tapped, speed decreases.

To Accelerate For Passing

Press the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.

136

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
134
135
136
137
138
...
»

Содержание Automobile



















































































































































































































































































































































































































































Отзывы:

Нет отзывов