Chrysler Automobile Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 434

Chrysler Automobile Скачать руководство пользователя страница 102

Things You Should Know About Your uconnect™
phone

uconnect™ phone Tutorial

To hear a brief tutorial of the system features, press the

button and say “uconnect™ Tutorial.”

Voice Training

For users experiencing difficulty with the system recog-
nizing their voice commands or numbers, the uconnect™
phone Voice Training feature may be used. To enter this
training mode, follow one of the two following proce-
dures:

From outside the uconnect™ phone mode (e.g., from
radio mode):

•

Press and hold the

button for five seconds until

the session begins, or,

•

Press the

button and say the

⬙

Setup, Voice Train-

ing

⬙

command.

Repeat the words and phrases when prompted by the
uconnect™ phone. For best results, the Voice Training
session should be completed when the vehicle is parked
with the engine running, all windows closed, and the
blower fan switched off.

This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.

To restore the Voice Recognition system to factory default
settings, enter the Voice Training session via the above
procedure and follow the prompts.

Voice Recognition (VR)

•

For best performance, adjust the rearview mirror to
provide at least

1

⁄

2

in (1 cm) gap between the overhead

console (if equipped) and the mirror.

•

Always wait for the beep before speaking.

102

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
100
101
102
103
104
...
»

Содержание Automobile



















































































































































































































































































































































































































































Отзывы:

Нет отзывов