Chrysler Automobile Скачать руководство пользователя страница 240 | Manualshive

Страница: 240 / 434

Chrysler Automobile Скачать руководство пользователя страница 240

NOTE:

The ENGINE START/STOP button should only

be removed or inserted with the ignition in the OFF
position.

Normal Starting

Using the ENGINE START/STOP Button —
Automatic Transmission Only

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

To start the engine, the transmission must be in PARK or
NEUTRAL. Press and hold the brake pedal while press-
ing the ENGINE START/STOP button once. The system
takes over and attempts to start the vehicle. If the vehicle
fails to start, the starter will disengage automatically after
10 seconds. If you wish to stop the cranking of the engine
prior to the engine starting, press the button again.

Using the ENGINE START/STOP Button —
Manual Transmission Only

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

To start the engine, press and hold the clutch pedal while
pressing and holding the ENGINE START/STOP button.
Release the button when the engine starts. If the vehicle
fails to start within 15 seconds, release the button, wait 10
to 15 seconds, then repeat the “Normal Starting” proce-
dure. If you wish to stop the cranking of the engine prior
to the engine starting, release the button.

To Turn Off the Engine Using ENGINE
START/STOP Button — Automatic Transmission
Only

1. Place the shift lever in PARK, then press and release
the ENGINE START/STOP button.

240

STARTING AND OPERATING

«
...
238
239
240
241
242
...
»

Содержание Automobile



















































































































































































































































































































































































































































Отзывы:

Нет отзывов