Chrysler 200 2017 Скачать руководство пользователя страница 78

Страница: 78 / 557

Frequently Asked Questions About Installing Child Restraints With LATCH

Can two child restraints be attached

using a common lower

LATCH anchorage?

Never “share” a LATCH anchorage

with two or more child restraints. If

the center position does not have

dedicated LATCH lower anchorages,

use the seat belt to install a child seat

in the center position next to a child

seat using the LATCH anchorages in

an outboard position.

Can the rear-facing child restraint

touch the back of the front passenger

seat?

Yes

The child seat may touch the back of

the front passenger seat if the child

restraint manufacturer also allows

contact. See your child restraint own-

er’s manual for more information.

Can the head restraints be removed?

Yes

All head restraints may be removed.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 200 2017














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 2017

Отзывы:

Chrysler 200 2017, Руководство пользователя, Страница: 78 / 557

Результаты поиска

Содержание 200 2017

Отзывы: