Chrysler 200 2017 Скачать руководство пользователя страница 117 | Manualshive

Страница: 117 / 557

Chrysler 200 2017 Скачать руководство пользователя страница 117

Manual Seats — If Equipped

Manual Front Seat Forward/Rearward Adjustment

On models equipped with manual seats, the adjusting bar
is located at the front of the seats, near the floor.

While sitting in the seat, lift up on the bar and move the
seat forward or rearward. Release the bar once you have
reached the desired position. Then, using body pressure,
move forward and rearward on the seat to be sure that the
seat adjusters have latched.

WARNING!

•

Adjusting a seat while driving may be dangerous.
Moving a seat while driving could result in loss of
control which could cause a collision and serious
injury or death.

•

Seats should be adjusted before fastening the seat
belts and while the vehicle is parked. Serious injury or
death could result from a poorly adjusted seat belt.

Front Seat Adjustment

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

115

«
...
115
116
117
118
119
...
»

Содержание 200 2017














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов