Chrysler 200 2017 Скачать руководство пользователя страница 217 | Manualshive

Страница: 217 / 557

Chrysler 200 2017 Скачать руководство пользователя страница 217

NOTE:

The ParkView Rear Back Up Camera has program-

mable modes of operation that may be selected through the
Uconnect System. Refer to “Uconnect Settings” in “Under-
standing Your Instrument Panel” for further information.

When the vehicle is shifted out of REVERSE (with camera
delay turned off), the rear camera mode is exited and the
navigation or audio screen appears again.

When the vehicle is shifted out of REVERSE (with camera
delay turned on), the camera image will continue to be
displayed for up to 10 seconds after shifting out of RE-
VERSE unless the vehicle speed exceeds 8 mph (13 km/h),
the vehicle is shifted into PARK or the ignition is switched
to the OFF position.

A touch screen button to disable display of the camera
image is made available when the vehicle is not in RE-
VERSE gear. Display of the camera image after shifting out
of REVERSE can be disabled via a touch screen button
personalization entry in the camera settings menu.

When enabled, active guide lines are overlaid on the image
to illustrate the width of the vehicle and its projected
backup path based on the steering wheel position.

When enabled, fixed guide lines are overlaid on the image
to illustrate the width of the vehicle.

Different colored zones indicate the distance to the rear of
the vehicle.

ParkView Camera Location

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

215

«
...
215
216
217
218
219
...
»

Содержание 200 2017














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов