Chrysler 200 2017 Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 557

Chrysler 200 2017 Скачать руководство пользователя страница 103

9-1-1 Call System Limitations

Vehicles sold in Canada and Mexico

DO NOT

have 9-1-1

Call system capabilities.

9-1-1 or other emergency line operators in Canada and
Mexico may not answer or respond to 9-1-1 system calls.

If the 9-1-1 Call system detects a malfunction, any of the
following may occur at the time the malfunction is de-
tected, and at the beginning of each ignition cycle:

•

The Rearview Mirror light located between the ASSIST
and 9-1-1 buttons will continuously be illuminated red.

•

The Device Screen will display the following message
“Vehicle device requires service. Please contact your
dealer.”

•

An In-Vehicle Audio message will state “Vehicle device
requires service. Please contact your dealer.”

WARNING!

•

Ignoring the rearview mirror light could mean you
will not have 9-1-1 Call services. If the rearview
mirror light is illuminated, have an authorized dealer
service the 9-1-1 Call system immediately.

•

The Occupant Restraint Control module turns on the
Air Bag Warning Light on the instrument panel if a
malfunction in any part of the system is detected. If the
Air Bag Warning Light is illuminated, have an autho-
rized dealer service the Occupant Restraint Control
system immediately.

Even if the 9-1-1 Call system is fully functional, factors
beyond FCA US LLC’s control may prevent or stop the
9-1-1 Call system operation. These include, but are not
limited to, the following factors:

•

Delayed accessories mode is active.

•

The ignition is in the OFF position.

•

The vehicle’s electrical systems are not intact.

•

The 9-1-1 Call system software and/or hardware are
damaged during a crash.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

101

«
...
101
102
103
104
105
...
»

Содержание 200 2017














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов