Chrysler 200 2017 Скачать руководство пользователя страница 451 | Manualshive

Страница: 451 / 557

Chrysler 200 2017 Скачать руководство пользователя страница 451

1. Remove the jack, wheel bolt wrench and wheel chocks

from the spare wheel as an assembly. Remove the chocks
from the jack assembly.

NOTE:

The jack handle attaches to the side of the jack with

two attachment points. When the jack is partially ex-
panded, the tension between the two attachment points
holds the jack handle in place.

2. Chock both the front and rear of the wheel diagonally

opposite of the jacking position. For example, if chang-
ing the right front tire, chock the left rear wheel. Place
both chocks under the tire.

3. If equipped with aluminum wheels where the center cap

covers the wheel bolts, use the wheel bolt wrench to pry
the center cap off carefully before raising the vehicle.

4. Before raising the vehicle, use the wheel bolt wrench to

loosen, but not remove, the wheel bolts on the wheel
with the flat tire. Turn the wheel bolts counterclockwise
one turn while the wheel is still on the ground.

Jacking Locations

Removing Jack Handle From Jack

6

WHAT TO DO IN EMERGENCIES

449

«
...
449
450
451
452
453
...
»

Содержание 200 2017














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов