Chrysler 200 2017 Скачать руководство пользователя страница 211 | Manualshive

Страница: 211 / 557

Chrysler 200 2017 Скачать руководство пользователя страница 211

•

The ParkSense Active Park Assist system will allow a
maximum of six shifts between DRIVE or REVERSE. If
the maneuver cannot be completed within six shifts, the
system will cancel and the instrument cluster display
will instruct the driver to complete the maneuver manu-
ally.

•

The system will cancel the maneuver if the vehicle speed
exceeds 5 mph (7 km/h) during active steering guidance
into the parking space. The system will provide a
warning to the driver at 3 mph (5 km/h) that tells them
to slow down. The driver is then responsible for com-
pleting the maneuver if the system is canceled.

•

If the system is canceled during the maneuver for any
reason, the driver must take control of the vehicle.

When the vehicle has reached the end of its backward
movement, the system will instruct the driver to check
their surroundings and stop the vehicle’s movement.

NOTE:

It is the drivers responsibility to use the brake and

stop the vehicle. The driver should check their surround-
ings and be prepared to stop the vehicle either when
instructed to, or when driver intervention is required.

Check Surroundings — STOP

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

209

«
...
209
210
211
212
213
...
»

Содержание 200 2017














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов