Chrysler 200 2017 Скачать руководство пользователя страница 77

Страница: 77 / 557

Frequently Asked Questions About Installing Child Restraints With LATCH

What is the weight limit (child’s

weight of the child re-

straint) for using the LATCH

anchorage system to attach

the child restraint?

65 lbs (29.5 kg)

Use the LATCH anchorage system

until the combined weight of the

child and the child restraint is 65 lbs

(29.5 kg). Use the seat belt and tether

anchor instead of the LATCH anchor-

age system once the combined

weight is more than 65 lbs (29.5 kg).

Can the LATCH anchorages and the

seat belt be used together to attach a

rear-facing or forward-facing child

restraint?

Do not use the seat belt when you

use the LATCH anchorage system to

attach a rear-facing or forward-facing

child restraint.

Can a child seat be installed in the

center position using the inner

LATCH lower anchorages?

Yes

You can install child restraints with

flexible lower anchors in the center

position. The inner anchorages are

17.7 inches (450 mm) apart. Do not

install child restraints with rigid

lower anchors in the center position.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 200 2017














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 2017

Отзывы:

Chrysler 200 2017, Руководство пользователя, Страница: 77 / 557

Результаты поиска

Содержание 200 2017

Отзывы: