Manual Configuration
This method does not require changes to your DHCP server. Once Step 1 is completed you
must do the remaining steps on each Cisco 79xx phone you attach to the system.
1.
Have your RevolutionPBX on your network and booted up
2.
Connect the phone to your network and boot it up
3.
When the settles on UNPROVISIONED, Press [Settings] button
4.
Press 9 for "Unlock Config"
5.
Enter the password - default is cisco (222 444 7777 222 666) and press Accept
6.
Press 3 for "Network Config"
7.
Press 32 for Alternate TFTP Server and ensure it's set to "Yes", then "Save" that set-
ting
8.
Press 3, for "Network Config"
9.
Press 7 and Edit to edit the TFTP Server setting
10. Backspace and correct the IP address so it matches the Internal IP of Revolu-
tionPBX
• The PBX IP Address can be found on the RevolutionPBX system website under
menu item DOCUMENTATION and then COMPANY FIREWALL SETTINGS
11. Accept the IP address
12. Reboot the phone if it doesn't do so already
13. Once phones boot up they will connect to the server and configure themselves
based on the settings you provided to the User Interface.
Page 22 of 38
RevolutionPBX Install Guide v3.4
revised 3/18/11
