manualshive.com logo in svg

Christie Roadie HD+35K, Руководство пользователя

Пользовательский руководитель Christie Roadie HD+35K доступен для бесплатной загрузки с manualshive.com. Это идеальный инструмент для понимания функциональности и настройки вашего устройства. Не упустите возможность скачать его прямо сейчас, чтобы получить максимум от вашего оборудования.

Поделиться
Скачать
background image

NOTICES 

COPYRIGHT AND TRADEMARKS 

© 2010 Christie Digital Systems USA, Inc.  All rights reserved.

All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.

REGULATORY

The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.  These limits are 
designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment.  The product 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications.  Operation of the product in a residential area is likely to cause harmful interference in which case the user will 
be required to correct the interference at the user’s own expense.

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

㧊

 

₆₆⓪

 

㠛ⶊ㣿

(A

 

)

㦒⪲

 

㩚㧦䕢㩗䞿❇⪳㦚

 

䞲

 

₆₆㧊㡺┞

 

䕦ⰺ㧦

 

⡦⓪

 

㌂㣿㧦⓪

 

㧊㩦㦚

 

㭒㦮䞮㔲₆

 

⹪⧒Ⳇ

, 

Ṗ㩫

 

㣎㦮

 

㰖㡃㠦㍲

 

㌂㣿䞮⓪

 

ộ㦚

 

⳿㩗

㦒⪲

 

䞿┞┺

.

GENERAL

Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected 
in this document.  Christie reserves the right to make changes to specifications at any time without notice.  Performance specifications are typical, but 
may vary depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions.  Performance 
specifications are based on information available at the time of printing.  Christie makes no warranty of any kind with regard to this material, including, 
but not limited to, implied warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or 
consequential damages in connection with the performance or use of this material.

The product is designed and manufactured with high-quality materials and components that can be recycled and reused.  This symbol  

means 

that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product 
appropriately and according to local regulations.  In the European Union, there are separate collection systems for used electrical and electronic 
products.  Please help us to conserve the environment we live in!

Canadian manufacturing facility is ISO 9001 and 14001 certified.

WARRANTY

For complete information about Christie’s limited warranty, please contact your Christie dealer.  In addition to the other limitations that may be 
specified in Christie’s limited warranty, the warranty does not cover:

(a) Damage occurring during shipment, in either direction.
(b) Projector lamps (See Christie’s separate lamp program policy).
(c) Damage caused by use of a projector lamp beyond the recommended lamp life, or use of a lamp supplied by a supplier other than 
Christie.
(d) Problems caused by combination of the product with non-Christie equipment, such as distribution systems, cameras, video tape 
recorders, etc., or use of the product with any non-Christie interface device.
(e) Damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or other natural disaster.
(f) Damage caused by improper installation/alignment, or by product modification, if by other than a Christie authorized repair service 
provider.
(g) For LCD projectors, the warranty period specified applies only where the LCD projector is in “normal use.” “Normal use” means the LCD 
projector is not used more than 8 hours a day, 5 days a week. For any LCD projector where “normal use” is exceeded, warranty coverage 
under this warranty terminates after 6000 hours of operation.
(h) Failure due to normal wear and tear.

PREVENTATIVE MAINTENANCE

Preventative maintenance is an important part of the continued and proper operation of your product. Please see the Maintenance section for specific 
maintenance items as they relate to your product.  Failure to perform maintenance as required, and in accordance with the maintenance schedule 
specified by Christie, will void the warranty.

Содержание Roadie HD+35K

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Roadie HD+35K

Barco G100 Installation Manual preview
G100
Бренд: Barco Страницы: 68
Canon REALIS WUX10 MARK II D Brochure & Specs preview
REALIS WUX10 MARK II D
Бренд: Canon Страницы: 12
Vaisala WSP150 Quick Reference Manual preview
WSP150
Бренд: Vaisala Страницы: 2
Panasonic PT-VW440U Operating Instructions (Functional Manual) preview
PT-VW440U
Бренд: Panasonic Страницы: 100
Draper Acumen M XT1000E Instructions preview
Acumen M XT1000E
Бренд: Draper Страницы: 4
CyberPower MPV615P User Manual preview
MPV615P
Бренд: CyberPower Страницы: 2
Sim2 NERO4 UHD User Manual preview
NERO4 UHD
Бренд: Sim2 Страницы: 60
InFocus SP-CEIL-004 Installation Instructions preview
SP-CEIL-004
Бренд: InFocus Страницы: 3
BenQ X12000 User Manual preview
X12000
Бренд: BenQ Страницы: 39
Da-Lite senIor electrol Instruction Book preview
senIor electrol
Бренд: Da-Lite Страницы: 8
Sinew VPS-HD User Manual preview
VPS-HD
Бренд: Sinew Страницы: 44
Liesegang ddv 2300 User Manual preview
ddv 2300
Бренд: Liesegang Страницы: 52
Vidikron 40 40ET Owner'S Manual preview
40 40ET
Бренд: Vidikron Страницы: 52
AIPTEK PocketCinema V10 Getting Started preview
PocketCinema V10
Бренд: AIPTEK Страницы: 290
Barco F80-Q7 User Manual preview
F80-Q7
Бренд: Barco Страницы: 86
BenQ BH3020 User Manual preview
BH3020
Бренд: BenQ Страницы: 75
LG BX401C Service Manual preview
BX401C
Бренд: LG Страницы: 39
Barco XLM H25 Owner'S Manual preview
XLM H25
Бренд: Barco Страницы: 111

Бренды по названию

Популярные бренды

Загрузить еще бренды