Christie LW41, Руководство пользователя

Страница: 27 / 560

25
STACK menu settings
LX41/LW41 User Manual - Instant Stack Guide 020-000509-01 Rev.1 (06-2012)
● The following functions are disabled.
- E xecuting of AUTO KEYSTONE (

Operating Guide → SETUP menu )
- STANDBY MODE (

Operating Guide → SETUP menu )
- AUTO SEARCH (

Operating Guide → OPTION menu )
- Turning on/ off AUTO KEYSTONE (

Operating Guide → OPTION menu )
- DIRECT POWER ON (

Operating Guide → OPTION menu )
- MY SOURCE (

Operating Guide → OPTION menu )
- COMMUNICATION TYPE (

Operating Guide → OPTION menu →
SERVICE → COMMUNICATION )
● T he input source from the following ports cannot be selected.
- USB TYPE A , USB TYPE B , LAN
● When Intellectual Stack is in use, an error message will be displayed if an error
occurs on any of the projectors.
When an error occurs, a full dialog will be displayed
on screen. The full dialog changes to a small dialog
after about 20 seconds without any key activity.
While the small dialog is displayed, pressing the ◄
button displays a full dialog again.
The numbers “
1 ” and “ 2 ” above the projector icons represent the
Main and Sub projectors re spectively.
Refer to the on-screen messages as shown below and take the necessary
actions to resolve the problem.
Example:
Cover Error: Lamp cover is opened.
Lamp Error: Lamp does not light up.
Fan Error: Problem with cooling fan.
Temp Error: Temperature of the projector is too
high.
Air Flow Error: Temperature of the projector is
too high, check that the exhaust vents are not
blocked.
Filter Error: The reading on the filter timer
exceeds th e hours set in the FILTER
MESSAGE menu . (

Operating Guide →
OPTION menu → SERVICE )
Cold Error: The ambient temperature is too
low.
(continued on next page)
3.7 Important information for Intellectual Stack (continued)
Full dialog
Small dialog