Christie LW41, Руководство пользователя

Страница: 11 / 560

9
Installation
LX41/LW41 User Manual - Instant Stack Guide 020-000509-01 Rev.1 (06-2012)
2.
Set the lens position to the upper limit wit h the VERTICAL adjust er.
NOTE
• If it is not set to the upper limit, the image of Set B may not
superimpose well enough to the image of Set A .
• Perform the MIRROR setting first if neces sary as it may change the image
position. (

Operating Guide → SETUP menu )
• HORIZONTAL adjuster is recommen ded to be set near the center position.
3.
Adjust the image of Set A to fit the screen with the VERTICAL adjuster,
HORIZONTAL adjuster, ZOOM ring and FOCUS ring . (

Setup Guide →
Displaying the picture )
A djust the image position using KEYSTONE and PERFECT FIT if necess ary.
(

Operating Guide → EASY MENU or SETUP menu )
NOTE
• D o not adjust ZOOM ring to the widest position, otherwise the
image of Set B may not superimpose well enough to the image of Set A . Fine
adjusting the image position of Set B electrically does not increase its image
size. Use the ZOOM ring to adjust the image size of Set B to slightly larger
than Set A .
• KEYSTONE cannot be operated when PERFECT FIT is in use. To adjust
the image using both KEYSTONE and PERFECT FIT, adjust KEYSTONE
first.
• If you a re using Simple Stack, go to 2.3 Installation of the second projector
( Set B ). (

11
)
(continued on next page)
Setting up Set
A
1.
T urn on Set A .
4.
Display the menu w ith the MENU button . (

Operating Guide → Using the
menu function )
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu will appear on s creen.
(

Operating Guide
→
OPTION menu
)