GS Series 630-635 Service Manual
7
020-001224-02 Rev. 1 (08-2018)
Introduction
This document provides technical information for assisting Christie qualified technicians in the servicing
of the Christie GS Series 630
and
635 projectors.
Every effort has been made to make sure the information in this document is accurate and
complete. However, due to continuing research all information is subject to change without notice.
Christie assumes no responsibility for omissions or inaccuracies.
Affected products
The following products are affected:
• Christie DHD635-GS
• Christie DWU635-GS
• Christie DHD630-GS
• Christie DWU630-GS
Site requirements
To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.
Projector components
Identify the main components of the projector.
Notice. Failure to comply with the following may result in property damage.
• Replacement of optical light engine parts must be done in a clean room.
