background image

NOTICES 

COPYRIGHT AND TRADEMARKS 

Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.

All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.

GENERAL

Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this 
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary 
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on 
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties 
of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection with the 
performance or use of this material. Canadian manufacturing facility is ISO 9001 and 14001 certified.

WARRANTY

Products are warranted under Christie’s standard limited warranty, the complete details of which are available by contacting your Christie dealer or Christie. In 
addition to the other limitations that may be specified in Christie’s standard limited warranty and, to the extent relevant or applicable to your product, the 
warranty does not cover:

a. Problems or damage occurring during shipment, in either direction.

b. Problems or damage caused by combination of a product with non-Christie equipment, such as distribution systems, cameras, DVD players, etc., or use of 

a product with any non-Christie interface device.

c. Problems or damage caused by misuse, improper power source, accident, fire, flood, lightning, earthquake, or other natural disaster.

d. Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than Christie service personnel or a Christie 

authorized repair service provider.

e. Problems or damage caused by use of a product on a motion platform or other movable device where such product has not been designed, modified or 

approved by Christie for such use.

f. Except where the product is designed for outdoor use, problems or damage caused by use of the product outdoors unless such product is protected from 

precipitation or other adverse weather or environmental conditions and the ambient temperature is within the recommended ambient temperature set 
forth in the specifications for such product.

g. Defects caused by normal wear and tear or otherwise due to normal aging of a product.

The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by 
a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the 
required international warranty fee has been paid.

The warranty does not obligate Christie to provide any on site warranty service at the product site location.

PREVENTATIVE MAINTENANCE

Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in 
accordance with the maintenance schedule specified by Christie, will void the warranty.

REGULATORY

The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the 
interference at the user’s own expense.

CAN ICES-3 (A)/NMB-3 (A)

 

기기는

 

업무용

(A

)

으로

 

전자파적합등록을

 

 

기기이오니

 

판매자

 

또는

 

사용자는

 

이점을

 

주의하시기

 

바라며

가정

 

외의

 

지역에서

 

사용하는

 

것을

 

목적으로

 

합니다

.

ENVIRONMENTAL

The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol 

 means that electrical 

and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according 
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the 
environment we live in!

Содержание D16HD-HS









































































Отзывы: