Configuring communications
HS Series D16-20 User Manual
54
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Adjusting network setting
Set up network configuration setting, such as reset back to default.
1. Select Menu > Configuration > Communications > Network.
2. Set up the appropriate network setting:
• Projector Name—Display the name of the projector. User can change the name of the
projector by web user interface. See
information.
• Show Network Message—Enable or disable to display of the network message.
• Reset to Default—Reset the network configuration setting, including LAN setting and
WLAN setting, back to default.
3. To apply the network configuration, press ENTER.
Setting serial port baud rate
Select the serial port and baud rate.
1. Select Menu > Configuration > Communications > Serial Port Baud rate.
2. Set up the appropriate baud rate.
3. To confirm the selection, press ENTER.
Enabling serial port echo
Enable or disable to allow the CLI command pass through.
1. Select Menu > Configuration > Communications > Serial Port Echo.
2. To swap, press ENTER.
Setting serial port path
Set the serial port path to allow the command pass through RS232 or HDBaseT.
1. Select Menu > Configuration > Communications > Serial Port Path.
2. Select the appropriate serial port path.
3. To confirm the selection, press ENTER.
Содержание D16HD-HS
Страница 1: ...HS Series D16WU HS D16HD HS D20WU HS D20HD HS User Manual 020 001466 01...
Страница 72: ......