Christie D16HD-HS, Руководство пользователя

Страница: 49 / 72

Configuring system settings
HS Series D16-20 User Manual 49
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Setting up power mode
Adjust various projector's power settings including the shutdown time, sleep timer, and standby
mode.
Setting the standby mode
Determine which standby mode the projector is in when AC power on.
1. Select Menu > Configuration > Power Management > Standby Mode.
2. Select the appropriate mode:
• 0.5W mode—Less power consumption which does not have the ability to monitor the
projector over a network cable.
• Communication mode—More power consumption in standby mode which allows you to
monitor the projector over a network cable.
3. Press ENTER.
Setting the AC power
Enable or disable this function to power on the projector directly or not when AC power is on.
1. Select Menu > Configuration > Power Management > AC Power On.
2. To swap, press ENTER.
Setting the time for auto shutdown
Set up a time for automatically turns off the projector after no signal is detected for a preset
number of minutes. If an active signal is received before the projector powers down, the image is
displayed.
1. Select Menu > Configuration > Power Management > Auto Shutdown.
2. Select the appropriate time to automatically turn off the projector when there is no signal.
3. To confirm the selection, press ENTER.
Setting the sleep timer
Set up a time for automatically power off the projector, after it has been on for a specified amount
of time.
1. Select Menu > Configuration > Power Management > Sleep Timer.
2. Select the appropriate time to automatically turn off the projector.
3. To confirm the selection, press ENTER.