background image

      Adjusting the image size and position

HS Series D16-20 User Manual

27

020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.

Geometry correction

Modify the geometry of the display image.

Saving geometry correction

Save the geometry correction setting, including Keystone, Pincushion, 4-Corner adjustment, and 
Christie Twist setting. One projector can save maximum up to five geometry settings, with Record 1 
being reserved for Christie Twist. 

1. Select Menu > Size & Position > Geometry Correction > Warp Memory > Save Warp.

2. To save the geometry setting, select an empty record.

3. To confirm the selection, press ENTER.

Applying geometry correction

Apply the previously saved geometry setting to the projector.
Uploading warp settings from Christie Twist erases the currently applied geometry setting.

1. Before applying the previous geometry setting, you must save the geometry setting. 

Se

Saving geometry correction

 on page 27 for further information.

2. Select Menu > Size & Position > Geometry Correction > Warp Memory > Apply Warp.

3. To apply specific geometry setting, select the required record.

4. To confirm the selection, press ENTER.

5. To erase the applied geometry setting, select Off.

Warping the image 

Use Christie Twist to digitally manipulate the image shape to fit on a curved, anamorphic screen.
Christie Twist Premium and Twist Pro offer advanced warping options. Refer to the Christie website 
(

www.christiedigital.com

) for product information and documentation. 

1. Connect the projector and computer to the same network and subnet.

2. To add a projector to a computer, from the Twist menu, click Home Add.

To connect the projector with Twist, use port 3003.

3. In Twist, configure warp settings.

Use the test patterns in Twist to help with image shaping.

For more information about creating warp files in Twist, refer to 

Twist User Guide (P/N: 020-

101380-XX).

4. To send the warp settings to the projector, on the canvas, right-click a projector window and 

select Send Warp.

5. To save the warp settings, from the Twist menu, click File > Save.

Содержание D16HD-HS









































































Отзывы: