Configuring system settings
HS Series D16-20 User Manual
46
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
4. To confirm the selection, press ENTER.
Locking the lens motor
Prevent all lens motors from moving. It disables the zoom, focus, and offset settings, locking out
any changes and overriding all other lens features. This feature prevents accidental lens position
changes in multiple projectors installations.
1. Select Menu > Configuration > Lens Settings > Lock all Lens Motors.
2. To enable locking of all lens motors, select Locked.
3. To unlock all lens motors, select Allow.
Resetting the lens to home position
Set the lens offset back to the home position.
1. Press LENS on keypad or LENS H/LENS V on remote control.
2. You can also select Menu > Configuration > Lens Settings > Lens Calibration.
3. To start the lens calibration, press ENTER.
4. To confirm the selection, select OK.
Selecting screen image orientation
Specify the orientation to use for the image. The projector supports front projection, rear
projection, front projection inverted, or rear projection inverted.
1. To invert the projection image, select Menu > Configuration > Ceiling Mount.
2. Select appropriate ceiling mount settings:
• Auto—Detect the orientation automatically.
• Off—Disable the ceiling mount setting.
• On—Enable the ceiling mount setting.
3. To confirm the image orientation, press ENTER.
4. To do a rear projection, select Menu > Configuration > Rear Projection.
5. To swap, press ENTER.
Содержание D16HD-HS
Страница 1: ...HS Series D16WU HS D16HD HS D20WU HS D20HD HS User Manual 020 001466 01...
Страница 72: ......