2. Select Register.
3. Enter the account: installer, user, administrator.
4. Enter the password.
5. Select Login.
Logging off the CounterAct Configure application
Log off CounterAct Configure when work in the application is complete.
1. From the homepage, select Setting > Account.
2. Select Log out.
Connecting to power
The receiver box must be connected to power using a hard-wired connection. As per local codes and
regulations, install either a cable gland or metal conduit fitting.
The fixture comes with a pre-installed cable gland and cable. If connecting the device to a conduit,
remove the cable gland and pre-installed power cable and directly wire the AC power to the terminal
block.
CounterAct requires a permanent AC connection to operate.
The following illustrates the wiring connections required for AC inputs.
#
AC input
L/+
Live/Line
Installation and setup
CounterAct Installation and Setup Guide
24
020-103456-02 Rev. 1 (12-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Содержание CA20-AC
Страница 1: ...Installation and Setup Guide 020 103456 02 CounterAct ...
Страница 52: ......