- 6
-
FOCUS BUTTON
Used to adjust focus.
AUTO PC ADJ. BUTTON
Use to operate the AUTO
PC Adjustment function.
KEYSTONE BUTTON
Used to correct keystone
distortion.
IMAGE BUTTON
Used to select the image
level.
REMOTE CONTROL OPERATION
ALL OFF SWITCH
Left Side
When using the remote control,
turn this switch to “ON.” And turn
it to “ALL OFF” when it is not in
use.
This remote control emits laser beam from the Laser Light Window when used as a Laser Pointer. When the
LASER button is pressed, the laser light goes on. When the LASER button is being pressed for more than one
minute or when it is released, the light goes off. The LASER POINTER INDICATOR lights RED and the LASER
is emitted with RED light to indicate the laser beam is being emitted.
The Laser emitted is the Cass II laser. Do not look into the Laser Light Window or shine laser beam onto
yourself or other people. The three marks shown below are caution labels for the laser beam.
CAUTION:
Use of controls, adjustments, or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
LASER LIGHT
WINDOW
These caution labels are put on the remote control.
LASER POINTER FUNCTION
POWER ON-OFF BUTTON
Used to turn the projector
on or off.
LASER BUTTON
Used to operate the Laser
Pointer function. The laser
beam is emitted when
pressing this button for
one minute.
When using the Laser
Pointer for more than one
minute, release this
button and press it again.
Used as a PC mouse in
Wireless Mouse Operation.
MOUSE POINTER
Used as a PC mouse in
Wireless Mouse Operation.
RIGHT CLICK BUTTON
Lights red while the laser
beam is emitted from the
Laser Light Window.
Lights green when dragged
to the “ON” position.
LASER POINTER
(DRAG ON) INDICATOR
LASER POINTER INDICATOR
LENS SHIFT BUTTON
Used to select the Lens
Shift function.
MUTE BUTTON
Used to mute the sound.
DRAG ON/OFF BUTTON
Used to select the DRAG
ON/OFF position.
Used as a PC mouse in
Wireless Mouse
Operation. Press this
button and the mouse
pointer button to drag the
selected screen object.
LEFT CLICK BUTTON
SW1 SW2 SW3 Code No.
DIP SWITCH SETTING
SW4 ........ LASER ON/OFF
4
ON
3
2
1
Code 1
ON
ON
Code 1
ON
Code 4
ON
OFF
Code 2
ON
OFF
Code 3
ON
ON
Code 5
OFF
ON
Code 6
OFF
OFF
Code 7
OFF
ON
Code 8
OFF
ON
OFF
ON
OFF
ON
ON
OFF
OFF
OFF
INSIDE THE BATTERY
COMPARTMENT BOX
This Remote Control provides the
DIP switches into the battery
compartment box.
Slide the SW4 (LASER ON/OFF
switch) to the “OFF” position. The
Laser Pointer function is not
operated.
Set the Switches 1-3 as shown in
table below depending on the
Code No. that you want to select
as the remote control code.
WIRED REMOTE JACK
When using as a Wired
Remote Control, connect a
remote control cable (not
supplied) to this jack.
Battery installation is
required when using as a
Wired Remote Control.
To insure safe operation, please observe following precautions:
●
Use two (2) AA or LR6 type alkaline batteries.
●
Always replace batteries in sets.
●
Do not use a new battery with an used battery.
●
Avoid contact with water or liquid.
●
Do not expose the remote control to moisture, or heat.
●
Do not drop the remote control.
●
If a battery has leaked on the remote control, carefully wipe the case clean and install new
batteries.
●
Danger of explosion if battery is incorrectly replaced.
●
Dispose of used batteries according to batteries manufacturers instructions and local rules.
Press the lid
downward and slide it.
Open the battery
compartment lid.
Install new batteries
into the compartment.
Replace the compartment
lid.
Two AA size
batteries
For correct polarity (+
and –), be sure battery
terminals are in
contact with pins in
the compartment.
REMOTE CONTROL BATTERIES INSTALLATION
1
2
3
Used to operate the P-
TIMER function.
P-TIMER BUTTON
Used to adjust zoom.
ZOOM BUTTON
NO SHOW BUTTON
Used to turn the picture
into a black image.
D.ZOOM BUTTON
Used to select the
DIGITAL ZOOM +/–
mode and resize the
image.
FREEZE BUTTON
Used to freeze the
picture.
Used to select the
MENU Operation.
INPUT 1 BUTTON
Used to select an input
source (INPUT 1).
SELECT BUTTON
Used to execute the
selected item, or
expand/ compress the
image in the DIGITAL
ZOOM +/- mode.
POINT (/-)
BUTTONS
Used to select an item or
adjust a value in On-
Screen Menu. They are
also used to pan the
image in the DIGITAL
ZOOM +/- mode.
The POINT LEFT/RIGHT
buttons are also used as
/- buttons.
INPUT 2 BUTTON
Used to select an input
source (INPUT 2).
INPUT 3 BUTTON
Used to select an input
source (INPUT 3).
Operating Range
Point the remote control
toward the projector (a
Receiver Window) when
pressing any button.
Maximum operating range for
the remote control is about
16.4’ (5 m) and 60° in front
and rear of the projector.
16.4’
(5 m)
60°
16.4’
(5 m)
60°
NETWORK BUTTON
Used to select a
network input (optional).
COLOR MANAGEMENT
BUTTON
Used to operate the
Color management
function.
MENU BUTTON
