Chapter 4
About this product
20
6501288-EN / 04
No.
Program
Function description
5
Program 5
Horizontal
brush:
horizontal wash
rear wash
Lateral
brushes:
short crossover wash at the front,
avoiding the mirror
lateral wash
crossover wash at the rear
4.2.2.1 Wash course of semi-stationary bus wash
The access and positioning lights indicate the forward symbol and clear the access into
the unit’s action area. The unit is in basic position.
The vehicle is positioned between the light barriers for stop and backward by means of
the positioning light. Afterwards the positioning and access lights indicate the stop sym-
bol.
The unit washes the vehicle’s front, sides and rear until it reaches the final position or the
short distance in the program is done.
The positioning lights indicate the forward symbol and the vehicle drives at a speed of
approx 12 m/min (recommended speed) through the standing, active unit, for the horizon-
tal and lateral wash.
As the vehicle exits the light barrier for the positioning becomes free and the positioning
lights indicate the stop symbol. The vehicle stops and the unit washes the rear, sides and
roof, until it reaches its basic position.
The positioning lights indicate the forward symbol and the vehicle exits the unit’s action
area.
The access light indicates the forward symbol after a programmable exit time. The unit is
basic position again.
4.2.3
Additional programs
INFORMATION
Depending on the optional configuration of the installation, the additional programs are
numbered consecutively.
4.2.3.1 Additional programs, basic version
No.
Program
Function description
1
Loading ramp protec-
tion
•
Brush wash without cross over wash at the rear
of the vehicle
•
Lateral brushes are not completely turned in-
wards at the rear of the vehicle
•
Wash height of the horizontal brush at the rear of
the vehicle: 1450 mm
Basic position
Positioning
Wash phase I
Wash phase II
Wash phase III
Exit
Basic position
