
DPF-300
INSTRUCTION MANUAL
Page 25
2020.09
DPF-300 DECLARATION OF CONFORMITY
MANUFACTURER:
American Hakko Products, Inc.
28920 Avenue Williams, Valencia, CA 91355
MACHINE DESCRIPTION:
DPF-300
Milling machine with electric extraction system for
PCB separation
THE
DPF-300
COMPLIES WITH THE ESSENTIAL REQUIREMENTS of the following
(harmonized) standards:
DIRECTIVE 2006/42/CE
UNI EN ISO 12100
Safety of Machinery - General principles for design -
Risk assessment and risk reduction.
UNI EN ISO 13857
Safety of machinery - Safety distances to prevent
hazard zones being reached by upper and lower limbs.
UNI EN ISO 14120
Safety of machinery - Guards - General requirements for the
design and construction of fixed and movable guards
UNI EN ISO 13849-1
Safety of machinery - Safety-related parts of control
systems - Part 1: General principles for design.
EN 60204-1
Safety of machinery Electrical equipment of machines. Part 1: General requirements.
IEC EN 61340-5-1
Protection of electronic devices from electrostatic phenomena - General
requirements
DIN EN 60335-2-69
(ex BIA ZH 1/487) Safety of household and similar electrical appliances - Part 2:
Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and
commercial use.
DIRECTIVE 2014/30/UE EMC (Electromagnetic compatibility)
EN 61000-6-4
Part 6-4: Generic standards - Emission standard for industrial environments.
EN 61000-6-2
Part 6-2: Generic standards - immunity for industrial environments.
DIRECTIVE 2014/35/UE (Low Voltage)
All electrical materials and subsystems used in the construction of the DPF-300 machine comply with
Directive 2014/35 /UE.
July 15th, 2020