
DPF-300
INSTRUCTION MANUAL
Page 20
2020.09
9.1 ROUTINE MAINTENANCE
DAILY:
- General machine cleaning:
- Check the level of dust inside the filter and the clogging of the filter cartridge.
- Check the wear of the milling bit.
- Check the wear of the interchangeable guide.
- Check the wear of the suction tube
N.B.: Do not clean the ESD workbench with alcohol-based detergents.
Do not use liquid detergents to clean the motor spindle
PERIODICALLY (every 20-30 days):
Always wear a dust mask and protective gloves.
- Check the locking screws.
- Clean the rear exhaust silencer with compressed air.
- Clean the top of the motor spindle with compressed air after removing the aluminium head
that secures the guide in place (see section.5).
9.1.2 SPARE PARTS
- Interchangeable guide standard thickness 1.5-2.5 mm. P/N DPF-GI-X.X
- FR4 milling bit (10pc. Pack) available standard diameters 1.5-2.5 mm. P/N DPF-FF-X.X
- ALUMINIUM milling bit (10pc. Pack) standard available 1.5-2.5 mm. P/N DPF-FA-X.X
- Motor spindle with centring kit P/N DPF-300-TF-000
- Filter cartridge for 1-1/4" filter P/N DPF-CAR-3.0
- Suction kit with regulator P/N DPF-21192-41489
- Suction hose Ø10 P/N DPF-PVCRTAGE010
- Black antistatic hose Ø8 P/N DPF-TAV0806B
- Stainless steel suction tube P/N DPF-TF-005
Custom interchangeable guides available upon request.