CHP DPF-300 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 26

CHP DPF-300 Скачать руководство пользователя страница 24

DPF-300

INSTRUCTION MANUAL

Page 24

2020.09

11. WARRANTY CONDITIONS

American Hakko Products, Inc. warrants that CHP DPF-300 will be free from defects in material and

workmanship for a period of ninety (90) days from the date of purchase, with extended warranty on
electronic portion of the unit, provided that no warranty shall apply to products that have been damaged,
altered, abused, improperly installed, improperly maintained, repaired after purchase, or have had their

identification markings removed or altered in any way. No warranty shall apply to any product or component
part that is subject to normal wear during use (such as tips, nozzle, blades, fuses, metal parts, filters,

brushes, and the like). All warranties are not transferable.

Extended warranty may apply to certain portion of DPF-300. For details on product warranty policy from

American Hakko Products, Inc. Visit www.HakkoUSA.com.

12. TECHNICAL SUPPORT

American Hakko Products, Inc.

28920 Avenue Williams, Valencia, CA 91355
Tel : (661)294-0090 Fax: (661)294-0096
Toll Free : (800)88-HAKKO(42556)

http://www.HakkoUSA.com E-mail : [email protected]

«
...
22
23
24
25
26
»

Содержание DPF-300



























Отзывы:

Нет отзывов