
DPF-300
INSTRUCTION MANUAL
Page 12
2020.09
4.3 INSTALLATION PROCEDURE
The machine comes with all its parts already assembled.
Before using the machine, perform the installation steps below:
•
Adjust the height of the 2 feet making sure that they rest correctly on the ground and secure their
position with the locking nuts.
•
Lock the swivel wheels using the dedicated brake.
•
Connect the machine to the main power (section 4.3.1)
•
Install the milling bit and the interchangeable guide of the required size, as indicated in section 5.
4.3.1 CONNECTION TO THE MAIN POWER
Connect the machine to a
120V
power supply line with
20A circuit breaker
using the cable and socket
supplied.