－
24
－
6 .
Operation
(Be sure to read Para. for safety.)
Default setting values have been set at the factory. For actual operation, be sure to execute the following
settings.
１
This recorder temporarily stores
measurement/calculation data in
the internal memory for data
processing, indication, etc. For
saving data, set a file and save
the data to the external memory.
On part of the LCD screen, some pixels may always be lit or not lit, and unevenness
in brightness may arise from the characteristic of the liquid crystal, but these are not
malfunctions.
Start
operation
Power ON
Settings
For operation, set the following parameters.
(1) Initial settings at power ON (10 Initial settings Be sure to set them.)
(2) Set all parameters on the HOME setting mode screen (12.1 Setting with the HOME settings)
together, or set each channel following the next steps.
(3) Input-related-settings (13.2 Input operation settings)
(4) Display-related-settings (13.3 Display settings)
(5) Set each channel individually by the recording-related-settings (13.5 File settings).
Operation end Power OFF
Storing data into a
memory card
13.5 File setting
Start
Start/end operations
of recording
13.5 File setting
Preparation
(1) Install this recorder to the panel. (
Installation)
(2) Complete the connections. ( Connections)
４
５
Operation screen
switching
Screen switching method
8
６
