－
127
－
16.2.4 Register to the instrument(PLC)
(1) Select “system setting”
→
“low order communications (read)” on the menu screen of the recorder.
* “low order communication (read)” is displayed when the recorder has low order communication
(read) option.
(2) Select the name of the model from the list of “model”. Then register PLC on each COM1 to COM5.
(3) Register administrate address of the recorder on “top address” and “read address”.
16.2.5 Register CH number of low order instrument
(1) Tap the MENU key at the operation screen of the recorder, and select “input computation
programming” on the list.
(2) Tap the
▼
of “input type” of CH which is registered low order instrument.
Select model which is registered “16.2.2 Setting of low order instrument” from the displayed list.
(3) Set CH number of low order instrument which is resisted “CH” column of third row.
When a model that registers by the low order communication setting and an actual connected model
have the difference, the selection item of the input kind of might not be normally displayed. Please
use externals where there is no difference in connected model and the main body setting.
About input setting of low order instrument
Remark
