S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
57
You can see ,
The speed of the console port is 38400bps,The data bit is 8 bit,There is no parity test and flow control.The stop bit is 1.
If there is no Hyper Terminal in the system, you can setup the Hyper Terminal software from the the system setup disk or
download from the website such as Hyper Terminal Private Edition.Attention: the configuration way is similar with that on
windows.
6.3 The interface and operating way of TELNET/Out-of-Band
The interface of Hyper Terminal will be like the fllowing when start system:
After you use the correct user’s name and password(the dafault user’s name and psaaword are “admin”),you will logon the
interface of TELNET/Out-of-Band Management.
Management interface is based on command line. After login, input “?”and you will see command lines as below::
6.4 Cli command and assist of use
6.4.1 Cli Command List Illumination
Command compose
Cli Command is compose by key words and parameter.the compages can have more type.
Command abbreviation
When user key the command in Cli interface, the key words of command can use abbreviate, that’s very exay to use.
Command phrase help
There is help information set at the command list interface. If you are not so
sure about a command phrase, please input the initial words you can remember and
then input “?” or space following“
？
”. The command will suggest the possible
command list. And you can input the command phrase according to this suggestion
，
and press “Enter” button to run this command.
