S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
59
rmon
Key in “rmon” you will enter the rmon config menu, you can configure the rmon’s group 1,2,3,9
snmp
Key in “snmp” you will enter the snmp config menu.
stp
Key in “stp” you will enter stp config menu, you can seeting the base parameter of stp agreement
system
Key in “system” you will enter the submenu of system, you can setting some basic function and info of switch.
trunk
It’s not the key words command, and need add the parameter which is the same as trunk group’s number.
vlan
Vlan’s config menu,user can configure the valn mode and the material seeting.
6.4.3 Command of aaa setting introduction.
the menu of aaa setting such as below:
Display the all setting info about 802.1x’s
configuration dot1x
example: Switch(aaa)#configuration dot1x
Display the setting info about some port’s 802.1x’s
configuration dot1x <port no.>
example: Switch(aaa)#configuration dot1x 1
Note: the port no must be between 1 and 24.
Display the setting info about Radius server
configuration radius
example: Switch(aaa)#configuration radius
Setting the port’s attribute of 802.1x
dot1x control
example: Switch(aaa)#dot1x control auto 1
