S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
62
Switch(aaa)#
Open 802.1x’s authenticate function:
Switch(aaa)# dot1x enable
Open 802.1x’s reauthenticate function:
Switch(aaa)# dot1x reauthenticate enable
Look over the setting result:
Switch(aaa)#config dot1x
Global 802.1X Parameters
Dot1x Status : Enable
ReAuth-enabled : yes
Accounting-enabled: yes
ReAuth-period: 3600
Quiet-period: 60
Tx-period: 30
Supp-timeout: 30
Server-timeout: 10
Max-req: 3
2): Setting the port 5 as the authenticate port
Setting the port 5’s state as auto:
Switch(aaa)# dot1x control auto 5
Look over the port 5’s state:
Switch(aaa)# conf dot1x 5
Port-control : auto
Maximum hosts : 20
Current Connecting hosts : 0
3):Check the link between switch and Radius:
Login the menu of net setting:
Switch(aaa)# network
Switch(network)#
Amend the switch’s IP
Switch(network)# ip address 172.2.2.3 255.255.0.0
Look over the switch’s IP after amend:
Switch(network)# conf ip
Ip Address : 172.2.2.3
Subnet Mask : 255.255.0.0
Default Gateway : 0.0.0.0
Dhcp status : Disable
