WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE of
17
40
30
WINCH
Tighten Mount Bracket
1. Tighten (2) M8 x 40mm Bolts (Red Circle), (2) M8
100mm bolts (Blue Circle) and (1) M6 25mm bolt
(Blue Square).
2. Do this for both sides (passenger & driver).
33
WINCH
Install Winch
1. Place your winch in the Winch Cradle [A].
2. Install (2) M10 Bolts provided with your winch to the
front (2) nuts on your winch.
3. Run both wires underneath the right headlight and into
the engine bay.
4. Connect onto Winch Cradle [A] as per winch
instructions.
31
WINCH
Reinstall Plastic Push Clips
1. With (1) Plastic Push Clip, removed earlier (Step 12),
reinstall to Winch Cradle [
A
].
2. Do this for both sides (passenger & driver).
32
WINCH
Tighten Bonnet Struts
1. Tighten M6 x 25mm bolts [H] (Blue Circle).
2. Tighten M8 OEM bolts (Red Circle).
3. Do this for both sides (passenger & driver).
