CHIEF 361043, Руководство по установке

Страница: 88 / 128

STANDARD LADDER ASSEMBLY INSTRUCTION MANUAL
Chief industries, Inc. Manual P/N 361043 88
Important Note: The Ladder side opening of the Adjustable Commercial Platform Assembly will use
(2) two Eave Platform Hand Rail posts stacked on top of each other. This assembly is intended for use
with a Platform Safety Gate installation.
Make note if your installation requires you to install your platform in an “over stiffener” position so
you can be sure to use the appropriate holes when completing the installation. When fastening your
Adjustable Platform assembly to the Adjustable Platform Tread Sheet Supports you will want to align
the leading edge of the Tread Plate so that it is normal to the sidewall.
(Right and Left Hand Assemblies of Adjustable Commercial Platforms)
Once you have fastened the Tread Sheet to all (4) four Tread Sheet Supports, ensure that the assembly
is square and tighten all the fasteners used in the assembly of the platform in order to move on to the
Adjustable Commercial Platform Cage Assembly.
After the Adjustable Commercial Eave Platform is assembled and attached to the Grain Storage
System, install the Eave Platform Ladder J-Post. Fasten the J-Post to the J-Post Ladder Brackets
previously installed using 5/16” Bin Bolts and Whiz Nuts.
(Assembly Image of J-Post Ladder Bracket & Eave Platform Ladder Handrail Bracket)