CHIEF 361043, Руководство по установке

Страница: 73 / 128

STANDARD LADDER ASSEMBLY INSTRUCTION MANUAL
Chief industries, Inc. Manual P/N 361043 73
The Adjustable Platform 86” Cage Straps have a subtle centerline bend. When installing the straps
make certain that the bend is facing OUTWARD away from the Grain Storage System. Be certain to
correctly orientate the Adjustable Platform 86” Cage Straps. The
SECOND hole from the TOP is 22
INCHES from the TOP END . The second hole from the bottom will only measure 18-3/4” from the
bottom end.
Important Note:
It is recommended to only finger tighten the fasteners at this stage until the rest of
the Eave Platform Cage Assembly is complete.
(Detail of Installation of Adjustable Platform 86” Cage Straps)
Install the remaining (2) two Adjustable Platform Cage Half Hoops. Start by inserting the 5/16” Bin
Bolts through the bottom most holes of the previous installed 86” Adjustable Platform Cage Strap and
then through the Fifth Adjustable Platform Cage Half Hoop making sure to orientate the Half Hoop in
the same manner as first three Half Hoops. Repeat this process for the Fourth Adjustable Platform
Cage Half hoop leaving the fasteners “finger tightened”.
Once the Fourth and Fifth Adjustable Platform Cage Half Hoops are connected to the 86” Cage Straps
located the (2) two Eave Platform Half Hoop Clips (9360065) and connect them to the short jogged
end of the Half Hoops through the hole on the long side of the clip by using a 5/16” Bin Bolt and 5/16”
Whiz nut so that the short side of the clip aligns with the Ladder Section. Fasten the short end of the
clip to the Ladder Section using the Ladder Clip Bolt Assy (9342512) and 5/16” Whiz nut.