CHIEF 361043, Руководство по установке

Страница: 71 / 128

STANDARD LADDER ASSEMBLY INSTRUCTION MANUAL
Chief industries, Inc. Manual P/N 361043 71
Check the orientation of the rung drip holes and make sure they’re facing toward the ground.
Slide one Ladder Clip Bolt Assy into the Hand Rail portion of the Ladder Section and connect to the
Ladder Bracket by pushing the bolt portion of the Ladder Clip Bolt Assy through the hole in the Ladder
Bracket and fastening a 5/16” Whiz Nut on the inside face of the Ladder Bracket.
After the Eave Platform Cage Post is secured locate (3) three of the Adjustable Platform Half Cage
Hoops (9360656) in your Eave Platform Assembly kit.
Connect the small angled jogged end of the Adjustable Platform Half Cage Hoop directly to the Eave
Platform Ladder J-Post through one of the (3) three holes in the top group of holes located on the
front face using 5/16” fasteners so that the TOP edge of the Adjustable Platform Half Cage Hoop is
parallel to the ground and even with the top of the Eave Platform Assembly Hand Rail.
(Connection Diagram for First Adjustable Platform Half Cage Hoops)
Fasten the other end of the Adjustable Platform Half Cage Hoop to the Eave Platform Adjustable Cage
Post at the corresponding location through the large elongated slot on the outer face. Leave the
fasteners for the Half Cage Hoop loose for the time being.
(Detail How to Align Adjustable Platform Half Cage Hoops)