CHIEF 361043, Руководство по установке

Страница: 16 / 128

STANDARD LADDER ASSEMBLY INSTRUCTION MANUAL
Chief industries, Inc. Manual P/N 361043 16
4. PRE-ASSEMBLY:
Chief does not assume any responsibility from parts damaged due to faulty or improper installation
procedures.
A. CHECKING SHIPMENT:
For your convenience steel components will be color coded, individual items labeled with an
appropriate part number and packages labeled. Hardware, including bolts, nuts, screws and other
small clips or brackets may be divided into smaller packages for ease of use and identification.
Check your shipment at the time of delivery against the packing list provided with the shipment. If any
items are missing or any damaged material is evident, note such shortage or damage on the freight bill
before you sign the shipment paperwork.
Claims of shortages will not be honored after 30 days from receipt of shipment. Parts that are missing
or damaged are the responsibility of the delivering carrier, not the manufacturer or dealer.
It is advisable to reorder damaged or missing parts immediately so that there will be no delay in the
bin installation. After receiving the invoice for the reordered material, file a claim with the delivering
carrier immediately.
B. KNOWING HARDWARE AND SPECIFICATIONS:
All components are assembled using SAE grade bolts with corresponding washers and nuts. Bolts are
marked with radial lines on the bolt head as shown in the following illustration.
Do not substitute any other bolt type or grade. Use only the bolts supplied by Chief. The
substitution of bolts from other sources is not permitted and will void the warranty.
When installing hardware, the minimum and maximum torque values shown below must be followed.
All hardware must seat tight against the corresponding bin component.
BOLT DIAMETER MINIMUM TORQUE MAXIMUM TORQUE
5/16” 22 FT.-LBS. 28 FT.-LBS.
7/16” 60 FT.-LBS. 75 FT.-LBS.