
29
28
Before starting a new sterilization cycle,
press and hold the
“FILTER”
icon/button
for about 2 seconds until it switches off.
Antes de iniciar un nuevo ciclo de
esterilización, presione y mantenga
presionado el ícono/botón de “
FILTRO
”
durante 2 segundos aproximadamente
hasta que se apague.
Avant de démarrer un nouveau cycle
de stérilisation, appuyer et maintenir
enfoncée l’icône/la touche «
FILTRE
»
pendant environ 2 secondes jusqu’à ce
qu’il s’éteigne.
Filter Replacement
Reemplazo del filtro
Remplacement du filtre
PROBLEM
POSSIBLE CAUSE
SOLUTION
The Sterilizer does not
turn ON.
There is no power.
The ON/OFF switch
(located on the back of the appliance)
is in the “OFF” position.
The cord plug or the cord
connector has not been plugged in
correctly, or they are damaged.
Appliance was submerged in water.
Check that there is power in the
electrical outlet.
Move the switch to ON position.
Check that the plug and connector
have been plugged in correctly, and
that they are in good condition.
Should the product still not work,
contact Customer Service.
Discard unit.
The feeding bottles are
stained at the end of the
sanitation cycle.
There are scale deposits in the
appliance.
High mineral content in tap water.
The Sterilizer needs to be descaled.
See the "Descaling" section for
more details.
Use distilled water.
Noise – Incomplete cycle.
Excessive scale deposits on heating
plate.
The Sterilizer needs to be descaled.
See the "Descaling" section for
more details.
The interface switches off
and three audible beeps are
heard in rapid succession.
Rapid scale build-up.
Use of tap water with high mineral
content, softened or treated water.
Use distilled water.
The Sterilizer needs to be descaled.
See the "Descaling" section for
more details.
Trouble Shooting and Repair
Not enough water on the heating
plate/container.
The thermal fuse is broken.
Place the correct quantity of water
inside the heating plate/container
and restart the cycle.
Contact Customer Service.
Содержание Advanced Steam
Страница 18: ...www chiccousa com ...