Chicago Pneumatic QRS 10, Инструкция, Страница: 78 / 86

9 Technical data
9.1 Electric cable size
Attention
The voltage on the compressor terminals must not deviate more than 10% from the
nominal voltage.
It is however highly recommended to keep the voltage drop over the supply cables at
nominal current below 5% of the nominal voltage.
If cables are grouped together with other power cables, it may be necessary to use
cables of a larger size than those calculated for the standard operating conditions.
Use the original cable entry. See section
Dimension drawings .
The compressor is delivered with 3 m (10 ft.) cable and a fitting cable gland.
This cable gland is necessary to ensure the protection degree of the electric cubicle and
to protect its components from dust from the environment.
Local regulations remain applicable if they are stricter than the values proposed below.
Power variant 7.5 kW
10 hp 11 kW
15 hp 15kW
20 hp
Frequency
(Hz) Voltage
(V) Cable Size Cable Size Cable Size
UL/cUL
60 208–230–460 AWG8/AWG10 AWG6/AWG10 AWG4/AWG8
60 575 AWG12 AWG10 AWG10
9.2 Settings for overload relay and fuses
7.5 kW
10hp 11 kW
15hp 15 kW
20hp
Frequency
(Hz) Voltage
(V)
UL/cUL Setting
overload
relay FM1
(A) Main fuses
(class J or
RK) + Disc.
switch size
>= 1.25 x
FLA Setting
overload
relay FM1
(A) Main fuses
(class J or
RK) + Disc.
switch size
>= 1.25 x
FLA Setting
overload
relay FM1
(A) Main fuses
(class J or
RK) + Disc.
switch size
>= 1.25 x
FLA
60 DOL
208-230–
460 36.3-34.3–
16.9 50-45–25 A 48-45–22.5 60-60–35 A N/A N/A
60 YD
208-230–
460 N/A N/A N/A N/A 33.2-30–15 80-80–40 A
60 DOL
575 13 20 A 18.5 25 A N/A N/A
60 YD
575 N/A N/A N/A N/A 12 30 A
Instruction book
76 2920 7114 70