Chicago Pneumatic CPF 300 A-8.6-60, Инструкция, Страница: 90 / 117

Instruction book
88 909935AIB
Model 2
Model 2 has a casting factor (of cover and vessel) of 0.8
Text on figure:
Reference Description
(1) Cover serial number here
(2) Data plate here
PED instructions and re-inspection data for CPF 300 A compressors
This machine is a pressure assembly of category IV according to 2014/68/EU.
Parts of article 4.3 of 2014/68/EU are subject to Sound Engineering Practice (SEP).
Parts of category I according to 2014/68/EU are integrated into the machine and fall under the
exclusion of article 1.2, (f)(i).
Parts subject to the Simple Pressure Vessel Directive 2014/29/EU are excluded from 2014/68/EU
according to article 1.2 (c).
Components subject to 2014/68/EU Pressure Equipment Directive greater than or equal to
category I:
• Oil separator vessel : Cat IV
Depending on the model a design standard is applicable:
• Model 1: AD-Merkblätter 2000
• Model 2: ASME section VIII div. 1
The design pressure of the vessel is 15 bar (218 psi).
Fatigue is calculated for an infinite lifetime, considering a dp as mentioned in the below
table.
• Safety valve : Cat IV