Chicago Pneumatic CPF 300 A-8.6-60, Инструкция, Страница: 60 / 117

Instruction book
58 909935AIB
Step Action
1 Install the compressor. Refer to the following sections: Dimension drawing , Installation
proposal and Electric cable section, length and fuse settings .
2 Affix the sticker, giving brief operating instructions, next to the control panel.
Stick labels near the control panel to warn the operator that:
• the compressor may start automatically after a voltage failure
• the compressor is automatically started and stopped
• the compressor may be remotely controlled
3
A number of VCI (Volatile Corrosion Inhibitor) plates are provided inside the bodywork to
protect the compressor against corrosion. Remove the plates.
4 Remove filler plugs (1).
Pour approx. 1 l (0.26 US gal/0.22 Imp gal) of oil into the compressor elements.
Refit the plugs.
5 Check that the compressor is filled with oil; the pointer of the oil level indicator should be
in the green range. Refer to the
Oil change
section.
Protection during transport
Transport fixtures
Step Action
1 The gear casing supports, motor support and air receiver supports are secured to the
frame, immobilizing the vibration dampers during transport.
2 Remove the bushes (1) from the gear casing supports and the motor support.
3 Remove the brackets fitted next to the air receiver supports.